Technical Data And Dimension Sheets; Conformity - SEW-Eurodrive MOVIMOT flexible MMF1 C/DBC Series Operating Instructions Manual

Technical data and dimension sheets

11

Conformity

11 Technical data and dimension sheets
11.1 Conformity
11.1.1 CE marking
11.1.2 UL approval (in preparation)
US
®
LISTED
11.1.3 EAC (in preparation)
11.1.4 UkrSEPRO (Ukrainian Certification of Products)
11.1.5 RCM approval
302
Operating Instructions – MOVIMOT
• Low voltage directive:
The documented device series fulfills the regulations of the low voltage directive
2014/35/EU.
• Electromagnetic compatibility (EMC):
The devices are designed for use as components for installation in machinery and
systems. They comply with the EMC product standard EN 61800-3 "Variable-
speed electrical drives". Provided that the installation notes are followed, the re-
quirements for CE marking of the entire machine/system equipped with these units
on the basis of the EMC Directive 2014/30/EU are met. For detailed information
about EMC-compliant installation, refer to the publication "Electromagnetic Com-
patibility in Drive Technology" from SEW‑EURODRIVE.
The CE mark on the nameplate represents conformity with the low voltage directive
2014/35/EU and the EMC directive 2014/30/EU.
The certification mark UL Listed on the nameplate confirms the UL and cUL approval
(USA). cUL is equal to the approval according to CSA.
The documented device series fulfills the requirements of the technical regulations of
the Customs Union of Russia, Kazakhstan, and Belarus.
The EAC marking on the nameplate certifies the conformity with the safety require-
ments of the Custom Union.
The UkrSEPRO mark on the nameplate certifies adherence to the technical regula-
tions of Ukraine for the documented unit series.
The RCM approval has been granted for the documented unit series.
The RCM mark on the nameplate certifies the conformity with ACMA (Australian Com-
munication and Media Authority).
®
flexible