Adjusting The White Peaking; Adjusting The Color Temperature; Setting The Real Black Threshold - Christie HS Series User Manual

Adjusting the white peaking

Use white peaking to adjust the color of white. The maximum value of white peaking, 100, can
increase the brightness of white to near 100%.
1. Select Menu > Image Settings > Advanced Image Settings > White Peaking.
2. Adjust the slider by arrow keys or press ENTER to input the value.
3. Press ENTER.

Adjusting the color temperature

Adjust the color temperature as expressed in degrees Kelvin.
1. Select Menu > Image Settings > Advanced Image Settings > Color Temperature.
2. Select appropriate color temperature:
• Warmest—Set the color temperature to 5500K.
• Warm—Set the color temperature to 6500K.
• Cool—Set the color temperature to 7500K.
3. Press ENTER.

Setting the Real Black threshold

Improve the contrast ratio by turning off the laser light when projecting black content. Set the Real
Black threshold to fit different installation requirements.
1. Select Menu > Image Settings > Advanced Image Settings > Threshold for RealBlack.
2. Select appropriate real black setting:
• Lights Out Timer (x0.5)—Set a timer for the laser light to turn off after detecting black
content.
• Lights Out Signal Level—Set a black level value as the threshold for the Real Black
function. The value can be selected from 0 to 5, with 0 being the darkest black and 5
being the brightest.
3. To confirm the selection, press ENTER.
4K7-HS/4K10-HS User Manual
020-001451-04 Rev. 1 (11-2019)
Copyright ©2019 Christie Digital Systems USA Inc. All rights reserved.
Adjusting the image settings
43