Christie HS Series User Manual page 41

1. Select Menu > Image Settings > Color Matching > HSG Adjustment.
2. To enable HSG adjustment, check HSG Enable.
3. Select one primary color (red, green, blue, cyan, magenta, or yellow).
4. To view a specific color while adjusting, press ENTER to enable Auto Test Pattern.
5. To edit hue of the primary color, adjust the slider or enter the color values of the primary color
component you selected until you are satisfied with the colors.
Hue values reflect the number of degrees of rotation around the wheel from the original color of
the pixel. Increasing the value indicates counterclockwise rotation and decreasing the value
indicates clockwise rotation.
6. To confirm the selection, press ENTER.
7. To edit saturation of the primary color, adjust the slider or enter the color values of the primary
color component you selected until you are satisfied with the colors.
Saturation values reflect the color shifting away from the primary color or toward white.
8. To confirm the selection, press ENTER.
9. To edit gain of the primary, adjust the slider or enter the color values of the primary color
component you selected until you are satisfied with the colors.
Increasing value indicates increasing the lightness, and decreasing the value indicates
decreasing it to black.
10. To confirm your selection, press ENTER.
11. Repeat steps 3 to 9 for each primary color component, except white.
4K7-HS/4K10-HS User Manual
020-001451-04 Rev. 1 (11-2019)
Copyright ©2019 Christie Digital Systems USA Inc. All rights reserved.
Adjusting the image settings
41