Adjusting lens settings
Adjust various lens settings including the lens type, zoom, focus, lens position, memorizing lens
position and locking the lens motors.
Viewing the lens type
After lens calibration, you can view the type of lens that is installed on the projector.
1. Select Menu > Configuration > Lens Settings.
The Lens Type on the top of the menu displays the lens information.
•
Undefined lens
•
Standard lens TR 1.20-1.73
•
Optional lens TR 0.85-1.02
•
Optional lens TR 1.70-2.12
•
Optional lens TR 2.12-2.83
•
Optional lens TR 2.83-5.66
•
Optional lens TR 5.66-10.18
Aligning the image with zoom and focus
Ensure that the image reflected from the digital micromirror device (DMD) is parallel and centered
with the lens and screen.
1. Display an image or test pattern that can be used to analyze image focus and geometry.
2. Press ZOOM on keypad or remote control.
You can also select Menu > Configuration > Lens Settings > Zoom.
3. Use the up and down arrow keys to zoom in or out of the image.
4. To exit the menu, press EXIT.
5. Press FOCUS on keypad or remote control.
You can also select Menu > Configuration > Lens Settings > Focus.
6. Use the up and down arrow keys to adjust the focus of the image.
7. To exit the menu, press EXIT.
8. To refine your adjusts, repeat steps 2 to 7.
4K7-HS/4K10-HS User Manual
020-001451-04 Rev. 1 (11-2019)
Copyright ©2019 Christie Digital Systems USA Inc. All rights reserved.
Configuring system settings
46