Setting Network Environment; Adjusting Lan Setting; Adjusting Wlan Setting - Christie HS Series User Manual

Setting network environment

Determine the communication settings such as network setup, serial port information, and so on.

Adjusting LAN setting

Set up network configuration for wire networking.
1. Select Menu > Configuration > Communications > LAN.
2. Set up the appropriate setting:
• Mac Address—Display the network MAC address value.
• DHCP—Enable or disable the DHCP to automatically get IP address, subnet mask, and so
on.
• IP Address—Assign the network IP address.
• Subnet Mask—Assign the network subnet mask.
• Default Gateway—Assign the network default gateway.
• Primary DNS—Assign the primary DNS.
• Secondary DNS—Assign the secondary DNS.
3. To apply the LAN settings, select Apply.

Adjusting WLAN setting

Set up network configuration for wireless networking.
1. Select Menu > Configuration > Communications > WLAN.
2. Set up the appropriate setting:
• SSID—Display the SSID of the wireless network.
• Enable—Enable or disable the wireless functionality.
• Start IP—Assign the start IP address of the wireless network.
• End IP—Assign the end IP address of the wireless network.
• Subnet Mask—Assign the subnet mask of the wireless.
• Default Gateway—Assign the gateway of the wireless.
3. To apply the WLAN settings, select Apply.
4K7-HS/4K10-HS User Manual
020-001451-04 Rev. 1 (11-2019)
Copyright ©2019 Christie Digital Systems USA Inc. All rights reserved.
Configuring communications
54