Geometry Correction; Saving Geometry Correction; Applying Geometry Correction; Adjusting Horizontal Keystone - Christie HS Series User Manual

Geometry correction

Modify the geometry of the display image directly on the projector.
Connecting to Christie Twist and Mystique grays out the geometry correction settings on the
projector. Uploading warp and blend from Twist and Mystique overwrites the currently applied
geometry correction settings. See

Saving geometry correction

Save the warp and blend settings to the projector memory. The blend memory saves the edge blend
settings, while the warp memory saves the settings of Keystone, Pincushion, 4-Corner, Manual
Warp Filter, and image warp.
1. Select Menu > Size & Position > Geometry Correction > Warp Memory > Save Warp or
Blend Memory > Save Blend.
2. To save the geometry setting, select a record.
One projector can save up to four warps and four blends.
3. To confirm the selection, press ENTER.

Applying geometry correction

Apply the previously saved geometry setting to the projector.
1. Before applying the previous geometry setting, save the geometry setting to the projector.
See Saving geometry correction
2. Select Menu > Size & Position > Geometry Correction > Warp Memory > Apply Warp
or Blend Memory > Apply Blend.
3. To apply the specific geometry setting, select the required record.
4. To confirm the selection, press ENTER.
5. To erase the applied geometry setting, select Off.

Adjusting horizontal keystone

Use horizontal keystone to correct a keystoned image shape in which the left and right borders of
the image are unequal in length, and the top and bottom are slanted to one of the sides.
1. Select Menu > Size & Position > Geometry Correction > Keystone > Horz Keystone.
2. To adjust the horizontal keystone, adjust the slider by arrow keys or press ENTER to input the
value you selected.
3. After inputting the value, press ENTER to apply.
4K7-HS/4K10-HS User Manual
020-001451-04 Rev. 1 (11-2019)
Copyright ©2019 Christie Digital Systems USA Inc. All rights reserved.
Configuring warp and blend
on page 27 for further information.
B
A
Adjusting the image size and position
on page 30 for more details.
B
A
27