Inspire M4 Assembly & Operation Manual page 35

STEP 55
Install Fabric Shroud
Step 55: To install Fabric Shroud, start at the front of the top shroud plate and wrap the edge
of the fabric shroud around the shroud plate. Pull tight as you wrap and make sure that
the velcro rim on the fabric shroud seals firmly to the velcro rim on the Shroud Plate.
Next, Do the same for the bottom of the fabric shroud around the bottom shroud plate.
Be sure to pull tight as fabric shroud is wrapped.
If ripples appear on the fabric shroud, undo the top of the shroud and re-wrap, pulling
up as the shroud is wrapped. This should give a nice smooth consistency to the shroud.
Install other Fabric Shroud on weight stack side in the same way.
(If necessary, shroud can be tightened by adjusting the Shroud Plate Adjustment Bolts.)
Page 32
Top Shroud Plate
Shroud Plate Adjustment Bolts
Bottom Shroud Plate