Inspire M4 Assembly & Operation Manual page 11

CAUTION:
Main Upright is unstable
until step 6 is completed.
Main Upright
Rear Base
STEP 4
1 – 3/8" Flat Washer
1 – 3/8" Lock Nut
Main Base
CAUTION: Main Upright is unstable until step 6 is completed.
Step 1: Attach Main Upright to Rear Base using:
(Note: Use Bolts for Alignment Only)
Step 2: Attach Brace to Main Upright using:
(Finger Tighten Only)
Step 3: Attach Brace to Rear Base and attach Main Upright to Main Base using:
(Finger Tighten Only)
Step 4: Attach Main Base to Rear Base using:
(Note: Use Nut on Bolt as shown)
Two
Two
One (3/8" x 2 ¾" Hex Bolt)
Two (3/8" Flat Washers)
One (3/8" Lock Nut)
Two
Two
One (3/8" Flat Washer)
One (3/8" Lock Nut)
Page 8
STEP 2
1 – 2 ¾" Hex Bolt
2 – 3/8" Flat Washers
1 – 3/8" Lock Nut
Brace
STEP 1
2 – 3 ¼" Hex Bolts
2 – 3/8" Flat Washers
STEP 3
2 – 1" Hex Bolts
2 – 3/8" Flat Washers
(3/8" x 3 ¼" Hex Bolts)
(3/8" Flat Washers)
(3/8" x 1" Hex Bolts)
(3/8" Flat Washers)