Inspire M4 Assembly & Operation Manual page 34

NOTE: To assemble orthopedic pads, place
pad on pad base. Work the edge of pad into
the groove of the pad base on all sides.
Do not use sharp objects during installation.
NOTE: Roller Pads have plastic inserts in them.
Be sure that the portion of the insert that sticks
out faces inwards.
Leg Extension Arms
Aluminum Discs
Roller Pads
Step 53: Slide Roller Pads onto Leg Extension Arms, be sure that the long end of tube
faces inward. Secure Roller Pads with Aluminum Discs and 3/8" x 1"
flat head bolts using:
(Wrench Tighten Bolts with 6mm Allen Wrench)
Step 54: Attach Shroud Plate to Cable Column Lower Mount using:
(Wrench Tighten Bolts)
STEP 53
4 – Roller Pads
4 – 3/8" x 1" Flat Head Bolts
4 – Aluminum Washers
Page 31
STEP 54
1 – Shroud Plate
2 – 3/8" x 2 ¼" Hex Bolts
2 – 3/8" Flat Washers
Four (Roller Pads)
Four (3/8" x 1" Flat Head Bolts)
Four (Aluminum Washers)
One (Shroud Plate)
Two (3/8" x 2 ¼" Hex Bolts)
Two (3/8" Flat Washers)