Inspire M4 Assembly & Operation Manual page 24

STEP 33
1 – Cable Pop-Pin
Pop-Pin
Note
Slide dust cover
Over Pop-Pin
Step 33: Attach Back Pad Link Cable to Seat Frame, align slot in Back Pad Link with
Cable Pop-Pin to lock into position, slide dust cover over Pop-Pin using:
Step 34: Attach Seat Base to Seat Mount using:
Step 35: Attach Thigh Pad to Seat Mount using:
Seat Base
STEP 34
2 – 1" Hex Bolts
2 – 3/8" Flat Washers
(Wrench Tighten Pop-Pin)
(Wrench Tighten Bolts)
(Wrench Tighten Bolts)
Seat Frame
One
Two
Two
Two
Two
Page 21
Thigh Pad
STEP 35
2 – 1 ½" Hex Bolts
2 – 3/8" Flat Washers
(Pop-Pin Cable)
(3/8" x 1" Hex Bolts)
(3/8" Flat Washers)
(3/8" x 1 ½" Hex Bolts)
(3/8" Flat Washers)