Manual Pulse Generator Operation - Mitsubishi Electric MELSEC-L LD75P Reference Manual

2.13 Manual Pulse Generator Operation

Function Overview
This program performs the manual pulse generator operation for Axis 1.
Program
This function uses the project (program name).
•LD-LD75_NML_V100A_E(13RunMPG)
Applicable Hardware and Software
It is the same as "Applicable Hardware and Software" of "2.1 Parameter Setting".
System Configuration
It is the same as "System Configuration" of "2.1 Parameter Setting"
This program uses the following devices.
No. Device
1 X0
2 X0C
3 X30
4 X31
Conditions for Using Sample Ladder Programs
It is the same as "Conditions for Using Sample Ladder Programs" of "2.1 Parameter Setting"
Data Type Application
Bit LD75 READY signal
Bit Axis 1 BUSY signal
Bit Manual pulse generator operation enable
command
Bit Manual pulse generator operation disable
command
MELSEC-L LD75P/LD75D Positioning Module Sample Ladder Reference Manual
47/169
Remarks
-
-
Enables the manual pulse
generator operation.
Disables the manual pulse
generator operation.
LDM-M022-A