Mitsubishi Electric MELSEC-L LD75P Reference Manual page 36

Devices
This program uses the following devices.
No. Device
1 X4
2 X8
3 X0C
4 X10
5 X2B
6 X4E
7 Y10
8 M3
9 M4
10 M5
11 M6
12 M7
13 M9
14 M32
15 D30
16 D32
Version Upgrade History
Version Date
1.00A 2011/09/26
Data Type Application
Bit Axis 1 M code ON signal
Bit Axis 1 Error detection signal
Bit Axis 1 BUSY signal
Bit Axis 1 Start complete signal
Bit Positioning start command (dedicated
instruction)
Bit Positioning start command (Y start)
Bit Axis 1 Positioning start signal
Bit Fast OPR command
Bit Fast OPR command storage
Bit Positioning start command pulse
Bit Positioning start command storage
Bit JOG/Inching operation flag
Bit Manual pulse generator operating flag
Bit ZP.PSTRT1 instruction complete device
Word ZP.PSTRT1 instruction control data
Word Start number
Description
First edition
MELSEC-L LD75P/LD75D Positioning Module Sample Ladder Reference Manual
36/169
Remarks
Not required when an M
code is not used.
-
-
-
-
-
-
Not required when a fast
OPR is not performed.
-
-
Not required when
JOG/Inching operation is not
performed.
Not required when manual
pulse generator operation is
not performed.
Notifies that the dedicated
instruction (PSTRT1) is
completed.
Used for the dedicated
instruction (PSTRT1).
Sets the positioning data
number.
LDM-M022-A