Teaching - Mitsubishi Electric MELSEC-L LD75P Reference Manual

2.19 Teaching

Function Overview
This program performs the teaching operation.
Program
This function uses the project (program name).
•LD-LD75_NML_V100A_E(19Teach)
Applicable Hardware and Software
It is the same as "Applicable Hardware and Software" of "2.1 Parameter Setting".
System Configuration
It is the same as "System Configuration" of "2.1 Parameter Setting"
This program uses the following devices.
No. Device
1 X0C
2 X39
Conditions for Using Sample Ladder Programs
It is the same as "Conditions for Using Sample Ladder Programs" of "2.1 Parameter Setting"
Data Type Application
Bit Axis 1 BUSY signal
Bit Teaching command
MELSEC-L LD75P/LD75D Positioning Module Sample Ladder Reference Manual
62/169
Remarks
-
-
LDM-M022-A