Override - Mitsubishi Electric MELSEC-L LD75P Reference Manual

2.15 Override

Function Overview
This program sets the override value for Axis 1.
Program
This function uses the project (program name).
•LD-LD75_NML_V100A_E(15OvrRid)
Applicable Hardware and Software
It is the same as "Applicable Hardware and Software" of "2.1 Parameter Setting".
System Configuration
It is the same as "System Configuration" of "2.1 Parameter Setting"
This program uses the following devices.
No. Device
1 X0C
2 X33
Conditions for Using Sample Ladder Programs
It is the same as "Conditions for Using Sample Ladder Programs" of "2.1 Parameter Setting"
Devices
This program uses the following devices.
No. Device
1 X0C
2 X33
3 M13
4 D14
Version Upgrade History
Version Date
1.00A 2011/09/26
Data Type Application
Bit Axis 1 BUSY signal
Bit Override command
Data Type Application
Bit Axis 1 BUSY signal
Bit Override command
Bit Override command
Word Override value
Description
First edition
MELSEC-L LD75P/LD75D Positioning Module Sample Ladder Reference Manual
52/169
Remarks
-
-
Remarks
-
-
-
Sets the override value.
LDM-M022-A