Opr Request Off - Mitsubishi Electric MELSEC-L LD75P Reference Manual

2.4

OPR Request OFF

Function Overview
This program turns OFF the OPR request for Axis 1.
Program
This function uses the project (program name).
•LD-LD75_NML_V100A_E(04OffBas)
Applicable Hardware and Software
It is the same as "Applicable Hardware and Software" of "2.1 Parameter Setting".
System Configuration
It is the same as "System Configuration" of "2.1 Parameter Setting"
This program uses the following devices.
No. Device
1 X10
2 X20
3 Y10
Conditions for Using Sample Ladder Programs
It is the same as "Conditions for Using Sample Ladder Programs" of "2.1 Parameter Setting"
Devices
This program uses the following devices.
No. Device
1 X10
2 X20
3 Y10
4 M0
5 M1
6
M2
7 D0
Data Type Application
Bit Axis 1 Start complete signal
Bit OPR request OFF command
Bit Axis 1 Positioning start signal
Data Type Application
Bit Axis 1 Start complete signal
Bit OPR request OFF command
Bit Axis 1 Positioning start signal
Bit OPR request OFF command
Bit OPR request OFF command pulse
Bit OPR request OFF command storage
Word OPR request flag
MELSEC-L LD75P/LD75D Positioning Module Sample Ladder Reference Manual
23/169
Remarks
-
-
-
Remarks
-
-
-
-
-
Stores the OPR request OFF
command.
-
LDM-M022-A