Stop - Mitsubishi Electric MELSEC-L LD75P Reference Manual

2.27 Stop

Function Overview
This program performs the axis stop for Axis 1.
Program
This function uses the project (program name).
•LD-LD75_NML_V100A_E(27Stop)
Applicable Hardware and Software
It is the same as "Applicable Hardware and Software" of "2.1 Parameter Setting".
System Configuration
It is the same as "System Configuration" of "2.1 Parameter Setting"
This program uses the following devices.
No. Device
1 X0C
2 X3F
3 Y4
Conditions for Using Sample Ladder Programs
It is the same as "Conditions for Using Sample Ladder Programs" of "2.1 Parameter Setting"
Devices
This program uses the following devices.
No. Device
1 X0C
2 X3F
3 Y4
4 M29
Version Upgrade History
Version Date
1.00A 2011/09/26
Data Type Application
Bit Axis 1 BUSY signal
Bit Stop command
Bit Axis 1 Axis stop signal
Data Type Application
Bit Axis 1 BUSY signal
Bit Stop command
Bit Axis 1 Axis stop signal
Bit Stop command pulse
Description
First edition
MELSEC-L LD75P/LD75D Positioning Module Sample Ladder Reference Manual
83/169
Remarks
-
-
-
Remarks
-
-
-
-
LDM-M022-A