Mitsubishi Electric MELSEC-L LD75P Reference Manual page 88

Conditions for Using Sample Ladder Programs
Use GX Works2 when connecting to the head module.
Network parameter setting
The following explains the settings for the CC-Link IE field that the programs use.
(1) Network Parameter Setting
a) Open the network parameter setting screen for the master/local module and configure the setting as
follows.
(2) Network Configuration Setting
a) Open the network configuration setting screen and configure the setting as follows.
Table 3-1-2 Network parameter setting
Network Type
Start I/O No.
Network No.
Total stations
Table 3-3-4 Network configuration setting
Station
No. Station type
1 1 Intelligent Device Station
MELSEC-L LD75P/LD75D Positioning Module Sample Ladder Reference Manual
Module 1
CC IE Field (Master Station)
0000
1
1
RX/RY Setting
Start End
0000 00FF
88/169
RWw/RWr Setting
Start End
0000 00FF
LDM-M022-A