Error Reset - Mitsubishi Electric MELSEC-L LD75P Reference Manual

3.24 Error Reset

Function Overview
This program reads error codes and resets errors for Axis 1.
Program
This function uses the project (program name).
•LD-LD75_IEF_V100A_E(24RstErr)
Applicable Hardware and Software
It is the same as "Applicable Hardware and Software" of "3.1 Parameter Setting".
System Configuration
It is the same as "System Configuration" of "3.1 Parameter Setting"
This program uses the following devices.
No. Device
1 X3E
2 X1008
Conditions for Using Sample Ladder Programs
It is the same as "Conditions for Using Sample Ladder Programs" of "3.1 Parameter Setting"
Devices
This program uses the following devices.
No. Device
1 X3E
2 X1008
3 M28
4 M5370
5 M5380
6 D79
7 D96
Data Type Application
Bit Error reset command
Bit Axis 1 Error detection signal
Data Type Application
Bit Error reset command
Bit Axis 1 Error detection signal
Bit Error reset
Bit Error code acquisition complete device
Bit Error reset complete device
Word Error code
Word Error reset request setting value
MELSEC-L LD75P/LD75D Positioning Module Sample Ladder Reference Manual
165/169
Remarks
-
-
Remarks
-
-
-
-
-
Obtains an error code.
Sets the error reset request
setting value.
LDM-M022-A