Jog Operation Setting - Mitsubishi Electric MELSEC-L LD75P Reference Manual

2.10 JOG Operation Setting

Function Overview
This program makes the JOG operation setting for Axis 1.
Program
This function uses the project (program name).
•LD-LD75_NML_V100A_E(10SetJOG)
Applicable Hardware and Software
It is the same as "Applicable Hardware and Software" of "2.1 Parameter Setting".
System Configuration
It is the same as "System Configuration" of "2.1 Parameter Setting"
This program uses the following devices.
No. Device
1 X2D
Conditions for Using Sample Ladder Programs
It is the same as "Conditions for Using Sample Ladder Programs" of "2.1 Parameter Setting"
Devices
This program uses the following devices.
No. Device
1 X2D
2 D5
3 D6
4 D7
Version Upgrade History
Version Date
1.00A 2011/09/26
Data Type Application
Bit JOG operation speed setting command
Data Type Application
Bit JOG operation speed setting command
Word Inching movement amount
Word JOG operation speed (low-order 16 bits)
Word JOG operation speed (high-order 16 bits)
Description
First edition
MELSEC-L LD75P/LD75D Positioning Module Sample Ladder Reference Manual
41/169
Remarks
-
Remarks
-
Sets the inching movement
amount.
Sets the JOG operation
speed.
LDM-M022-A