Usb Details - Welch Allyn 5002 Service Manual

6. The follow error messages may show:
Error Message
ER ZR0
ER ZR1
ER ZR2
ER ZR3
ER OL
ER SP1
ER SP2
ER SP3
ER SP4
ER SP5
ER SP6
If an error occurs, press
If the error continues see the disassembly and troubleshooting section to identify.

USB Details

For detailed help and information regarding the data output capabilities, contact Welch Allyn.
Reading is outside the scale type's acceptable mV/V range.
Calibration message failed to send.
There was an error while waiting for the scale to calibrate.
The calibration did not save.
The span weight was greater than the capacity weight of the
scale.
The span weight was outside the acceptable span margin for
the given mV/V reading.
Calibration weight message failed to send.
Does not currently exist.
Calibration weight message failed to send.
There was an error while waiting for the scale to calibrate.
This can occur if the user presses the Zero key while
calibrating, or if the measurement board has an internal
error.
The calibration did not save.
the LB/KG key to exit back to the Calibration options. Retry the calibration.
Meaning
25