Rear Panel Cabling - Keysight PNA Series Operation And Installation Manual

System Installation
PNA, Controller, and Test Head Module Interconnections

Rear Panel Cabling

Figure 3-9 on page 14
systems. Torque all RF connections to 8 in-lbs (0.90 N.m) to insure proper
connection.
Figure 3-9 Millimeter-wave 2- and 4-Port Model Rear Panel Cabling. Connect the
system cables to the rear panel (8120-2970 (x5), N5240-60092, and
N4011-21002)
Table 3-10 N5290A 2- and 4-Port Rear Panel Cabling
LO OUT
From: PNA
LO IN
To: N5292A
3- 14
shows how to install the cables for 2-port and 4-port
D/R2 C/R1
D C
Keysight Self-Configured System Installation Guide
R TEST SET I/O
R TEST SET I/O
B A
B A