Information In This Chapter; Chapter Three At-A-Glance - Keysight PNA Series Operation And Installation Manual

System Installation

Information in This Chapter

Information in This Chapter
This chapter describes preparing to receiving your N5292A test set,
N5293A/95A modules, and the millimeter-wave system's installation
procedure(s).

Chapter Three at-a-Glance

Section Title
"Getting Prepared" on page 3
"Getting Assistance from Keysight"
on page 4
"Receiving the System" on page 5
"PNA, Controller, and Test Head
Module Interconnections" on
page 7
"Configuring the PNA Software for
a Self Configured System" on
page 19
"OML/VDI and N5293A/5A Test
Heads – Banded Configuration
Calibration (Only)" on page 21
"Initializing the Banded
Millimeter-wave System" on
page 29
"Running the Installation
Calibration (Broadband Systems
Only)" on page 30
"Troubleshooting the OML/VDI
MiIlimeter Modules" on page 33
3- 2
Summary of Content
Discusses how to download the service guide, tools required for
installation, and the time required to install the system.
How to contact Keysight for support with your system.
What to do when you receive your system, verifying the parts received,
and customer engineering support.
A discussion and procedures for assembling your millimeter-wave
system.
Using your PNA/PNA-X's software to configure your system.
Discusses how to calibrate a banded millimeter-wave system using 3rd
party millimeter heads.
Discusses how to initialize the millimeter-wave system.
Describes the broadband (only) millimeter-wave installation
calibration.
How to troubleshoot on your millimeter-wave heads.
Keysight Self-Configured System Installation Guide