Millimeter System Rackmount Kits; Millimeter System Optional Parts - Keysight PNA Series Operation And Installation Manual

System Description
Interconnect Kits, Rackmount Kits, and Optional Parts

Millimeter System Rackmount Kits

Use the table below to order rackmount kits.
Table 2-8 Rackmount Hardware
√ Keysight Part
Number
5063-1543
5063-1555
1CM110A
1CP104A
E3663A
1. Depending on the type of instruments ordered for your system, you might receive an extra (duplicate) set of N5292A
Test Controller mounting rails.

Millimeter System Optional Parts

For information on N5292A system rackmount kits, refer to
Hardware" on page
Use the table below to order optional accessories for your self-configured
millimeter-wave system.
Table 2-9 Millimeter System Optional Parts
√ Keysight Part
Number
N5260AK91
N5290A301
N5290A302
N5290A304
1. Refer to Figure 2-9 on page
2. Refer to Figure 2-3 on page 2-6
Keysight Self-Configured System Installation Guide
Description
Rackmount Kits for installation without handles - PNA
Rackmount Kits for installation with handles - PNA
Rackmount Kits for installation without handles - N5292A
Rackmount Kits for installation with handles - N5292A
1
Rails
2-19.
Description
12V power supply and adapter—OML module
Frequency extender bias tee adapter kit (Only can be used with
N5293A/95A millimeter modules (TxRx))
Frequency extender desktop positioner. (LFE and Non-LFE
1
Broadband Only)
2
OML/VDI cable adapter
2-20.
and Figure 2-4 on page 2-7.
Qty
1
1
1
1
2
"Rackmount
Qty
1
1
1
2-19