Interconnect Kits, Rackmount Kits, And Optional Parts; Banded And Non-Lfe Broadband N52Xxb Millimeter System Interconnect Kits - Keysight PNA Series Operation And Installation Manual

System Description

Interconnect Kits, Rackmount Kits, and Optional Parts

Interconnect Kits, Rackmount Kits, and Optional Parts
Banded and Non-LFE Broadband N52xxB Millimeter System
Interconnect Kits
IMPORTANT!
The N5292A-xx4 interconnect kits contain 2.4 mm to 3.5 mm cables. It is
important to connect the 2.4 mm end to the PNA and to connect the
3.5 mm end to the N5292A test set controller. Improper connections will
result in damage to your instruments (i.e., the 2.4 mm cable end is
compatible with the 1.85 mm connector of the PNA).
It is important to use two wrenches when connecting the semi-rigid cables
to the 1/2/3/4 front ports of the PNA to avoid stressing the connectors and
causing damage to your PNA.
See also
Figure 2-8 PNA RF Port Connector to N5292A Test Set Lo Band Connector (2.4 mm)
2-14
Table 2-7 on page 2-16.
Keysight Self-Configured System Installation Guide