Information In This Chapter; Chapter Two At-A-Glance - Keysight PNA Series Operation And Installation Manual

System Description

Information in This Chapter

Information in This Chapter
This chapter describes preparing to receiving your 2-port or 4-port
self-configured banded or non-LFE broadband millimeter system and the
system's installation procedure(s).

Chapter Two at-a-Glance

Section Title
"Self-Configured Banded or
Non-LFE Broadband
Millimeter-Wave Network Analyzer
System" on page 2-3
"Network Analyzer Requirements"
on page 2-8
"N5292A Test Set Description" on
page 2-11
"Interconnect Kits, Rackmount Kits,
and Optional Parts" on page 2-14
"Compatible Millimeter-wave
Modules" on page 2-21
"Basic System Measurement
Configurations" on page 2-26
2-2
Summary of Content
Overview of the banded or non-LFE broadband N52xxB
millimeter-wave system.
Description of compatible PNA features.
N5292A test set controller description of front and rear panel features.
Description of the interconnect heads, rackmount kits, and optional
parts.
Keysight N5293A/95A millimeter head and OML/VDI millimeter head
descriptions of their features.
Millimeter-wave system basic measurement configurations.
Keysight Self-Configured System Installation Guide