Table of Contents
Advertisement
6) Self Check Touch Panel
7) Self Check I/O
Initial screen
8) Self Check Sensor
c) Line check screen (horizontal)
・Line check (Line)
check screen (vertical).
c') Line check screen (vertical)
・Touching the screen returns to the
display check.
・ Touching the blue portion of the screen
blackens the screen. Check that the
screen entirely blackens.
・The signal on the screen changes from
blue to yellow while each input signal
is set to "ON".
・Pressing each output signal key turns
ON/OFF output signal alternately.
The check result is displayed on the blue portion.
「+EXC」displays the output level of the sensor power
supply of this equipment numerically
「A/D」checks whether A/D in this Meter is normal or not
「+SIG」checks whether the connection is made or not
「-SIG」checks whether the connection is made or not
「SENSOR」checks the connected sensor for any trouble
･Pressing "START" key starts the self-check.
Touching the screen switch to line
Check if each line is connected.
75/118
Advertisement
Table of Contents
