Table of Contents
Advertisement
Introduction
Thank you for purchasing G1000 Graphic Multi-meter.
Check for any breakdown during transit and discrepancy of the specification. Always keep this manual
at hand.
Cautions for safety
！
Cautions
(1)Applying voltage and current exceeding the maximum permissible value results in the breakdown
of the meter.
(2)Use supply voltage within the specified limit. Using the meter outside the specified limit causes fire,
electric shocks and other troubles.
(3)The contents of this manual are subject to change without notice for further improvement.
(4)This manual has been carefully prepared. However, if you find any questionable matter, error,
omission, etc., please contact the dealer from which you bought the meter or directly our company.
(5)After reading this manual, keep it in an easily accessible place.
Before use
In order to obtain the highest performance of your G1000, thoroughly read this manual before use.
Configurations of model
The G1000 Series are configured as follows :
Check that there is no discrepancy between the model and its specifications you have chosen when
ordering and the model and its specifications under your hand.
G
1
1
5
0
* Standard equipment of the comparison output (Open collector output) is carried out.
0
2
Display model
SD memory card function
* SD memory card is not attached.
(Please purchase the product made from Panasonic separately.)
Input unit
Output unit
Drive power supply
Series name
2 : Japanese, English
0 : No function available
1 : Function available
0 : Strain gauge / Process input unit
3 : BCD parallel + RS-232C
4 : Analog output + RS-232C
5 : RS-232C
6 : RS-485
1 : 100 to 240V AC ( 50/60Hz)
2 : 24VDC ± 15%
2/118
Advertisement
Table of Contents
