WATANABE G1000 Series Instruction Manual page 26

Process Input Setting
(Bch) (P00 to P15)
Setting item
Pattern Select
Pattern Copy
Input Range
Full Scale
Offset Scale
Full Scale Input
Offset Scale Input
Decimal Point
Digital Shift
Unit
Moving Average
Analog Filter
Digital Limiter HI
Digital Limiter LO
Step
Comparison Set Value Setting
(Ach/Bch) (P00 to P15) / (P00 to P15)
Setting item
Pattern Select
Pattern Copy
HH Limit
HI Limit
LO Limit
LL Limit
HH Hysteresis
HI Hysteresis
LO Hysteresis
LL Hysteresis
Type
Zero Band
Start Condition
Default value
－－－－－－ P00 to 15
－－－－－－ P00 to 15
±0 to 10V ±0 to 10, ±0 to 20mA, 4 to 20mA
10000 0 to 99999
0 0 to 99999
10.000 -10.000 to 10.000, -20.000 to 20.000
0 -10.000 to 10.000, -20.000 to 20.000
0 0.0000, 00.000, 000.00, 0000.0, 0
0 ±99999
None Select from among 79 different units.
off off, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024 (times)
600 10, 30, 300, 600 (Hz)
99999 -99998 to 99999
-99999 -99999 to 99998
1 1, 2, 5, 10
Default value
－－－－－－ P00 to 15
－－－－－－ P00 to 15
1000 -99999 to 99999
500 -99999 to 99999
100 -99999 to 99999
50 -99999 to 99999
1 -9999 to 9999
1 -9999 to 9999
-1 -9999 to 9999
-1 -9999 to 9999
Normal Normal, Area, Rank
0 0 to 99999
Always Always, Zero Band, Motion, Z + M
Setting range
Setting range
26/118