Table of Contents
Advertisement
6) Comparison waveform drawing (Comparison Wave Draw)
・ Move the cursor on the screen to determine a point and prepare a comparison
waveform by connecting between points with a straight line.
*HI limit comparison waveform is first prepared, and then LO limit
comparison waveform is prepared.
Move the cursor with the
・
key, determine a drawing starting point,
and press "OK" key to set it.
Pressing "ESC" key after completion of
setting will reset the drawing starting
point.
・When the cursor is moved furthermore to
determine the next drawing point and press
"OK" key, so that the last determined points
are connected with a straight line.
Pressing "ESC" key after completion of
setting will reset the determined point.
・Draw a waveform by repeating the
above-mentioned procedure.
・When drawing is completed, press "SET"
key to save the comparison waveform in the
buffer temporarily.
(The prepared waveform turns into green.)
63/118
Advertisement
Table of Contents
