Table of Contents
Advertisement
Itemized setting screen 4/6
Internal output
OFF
Example OUT2 output
ON
OFF
Actual output
Example OUT2 output
ON
* For time setting, priority is given to Td and other settings than
Td are considered as same setting.
Td=1/sampling speed.
For example, sampling of 10 times/second means Td = 100ms.
For time-setting = 0.001 to 0.100,
For time-setting = 0.501 to 0.600, operation is done as time
setting = 0.600.
8) Power ON Delay
・Set time on the 10-key input screen.
・Delay range : 0 to 30 seconds
・Each output does not change during the time setting immediately
after turning on power.
Comparison output (OUT1 to OUT5) = OFF
BCD output (open collector output) = OFF
Analog output (voltage output = 0V, current output = 0mA)
・Power on delay = 0 no power on delay functions.
9) Back Light Time
・Set time on the 10-key input screen.
・Delay range : 0 to 99 minutes
・When the touch panel is never touched during the preset time
(minute), the back light of LCD is turned off.
Touching the touch panel while light is off turns on the back light of
LCD.
・Back light time = 0 it lights up continuously.
10) Contrast
・Control brightness on the contrast screen.
・Each time "+" key on the control screen is pressed, screen
brightness increases.
11) Cross Talk
・Control "flicker" on the display screen.
・Each time "+" or "-" key on the control screen is pressed, screen
flicker is adjusted.
Off delay start
Cancel
Off delay
*(Time setting)
*(Time setting)
Contrast/Cross talk screen
32/118
Restart
Off delay
Advertisement
Table of Contents
