Table of Contents
Advertisement
●Common specifications
Backup : Each data setting = Flash ROM (Written in at completion of setting)
Digital zero value and display screen =Holds for about two weeks from powering off with
secondary battery. (Full charging time of secondary battery : About 80hours)
Data setting method : Through each setting menu and touch panel or RS-232C/485.
Power supply : AC = 100 to 240V AC ±10％ (50/60Hz) ,DC = 24V DC ±15％
Power consumption : AC = Approx. 32VA (MAX) ,DC = Approx. 17W (MAX)
Outside dimension : 100mm(W)×96mm(H)×153mm(D)
Operating temperature/humidity range : 0 to 40℃, 35 to 85％RH (No dew condensation shall occur.)
Weight : Approx. 1.0kg
Dielectric strength : One minute at 500V/1mA DC applied between input (AG)/comparison output
One minute at 1500V/3mA AC applied between power supply/protect ground
terminal.
One minute at 500V DC/1mA applied between protect ground terminal/input (AG),
comparison output (E.COM), RS-232C (SG), BCD output (D. COM), analog output
(COM)
Insulating voltage : 500V DC More than 100MΩ at each of above-mentioned terminal
Accessories : Simplified Instruction Manual, Hardware Setup Manual, Utility CD,
Card edge connector (Option : BCD unit)
Instruction Manual for SD Memory Function (Option : SD Memory Function)
(E.COM), RS-232C/485 (SG), BCD output (D. COM), analog output (COM)
112/118
Advertisement
Table of Contents
