Table of Contents
Advertisement
Itemized setting screen 3/3
8) Comparison area setting (Comparison Area)
・Determine the starting point/end point of the comparison range, and set the
waveform portion for comparison.
9) Displacement Max/Min Value
・Displacement Max Value
・Displacement Min Value
Set it on the 10-key input screen.
Setting ranges : 0 to 99999
*Displacement max/min value is available only when (6) W&D is selected by
「6. Basic Function Setting (Setup) 1)Meter Setting」.
*When HI/LO limit waveform setting is completed, write it in for memory.
For details, refer to the above-mentioned 2) Pattern Write.
Move the cursor with key,
・
determine a comparison range starting
point and comparison range end point, and
press "OK" key to set it.
(Cursor turns into yellow.)
Pressing "ESC" key after completion of
setting will reset the comparison area
starting point.
・Move the cursor furthermore and
determine the end point of the comparison
area.
・Determine the end point of the
comparison area with "OK" key.
Pressing "ESC" key after completion of
setting will reset the comparison area end
point.
・When the range has been set, press "SET"
key to save the comparison area in the
buffer temporarily.
65/118
Advertisement
Table of Contents
