WATANABE G1000 Series Instruction Manual page 64

7) Comparison waveform edit (Comparison Wave Edit)
・Correct the prepared comparison waveform.
・Select a waveform (HI Limit waveform or
LO Limit waveform) to be edited with
"Up/down cursor" key.
・Move the cursor, determine an edit starting
point, and press "OK" key.
Pressing "ESC" key after completion of
setting will reset the edit starting point.
・Move the cursor, determine an edit end
point, and press "OK" key.
Pressing "ESC" key after completion of
setting will reset the edit ending.
・Move the cursor, determine an edit pass
point, and press "OK" key.
・A straight line connecting the edit starting
point-Pass point and edit end point is
prepared.
Pressing "ESC" key will reset the edit pass
point.
・When editing is completed, press "SET" key
to save the comparison waveform in the
buffer temporarily.
64/118