Arduino® Connectors; Description; Operating Voltage; Arduino ® Interface - ST STM32L562E-DK User Manual

• The STMod+ cannot be operated simultaneously with the ARDUINO
• The STMod+ cannot be operated simultaneously with onboard MEMS and module CN2 MEMS.
6.18
ARDUINO
6.18.1

Description

The ARDUINO
board. Most shields designed for ARDUINO
small form factor application
6.18.2

Operating voltage

The ARDUINO
12 V is also available to supply the STM32L562E-DK Discovery kit from an ARDUINO
6.3 Power supply
6.18.3 ®
ARDUINO interface
Figure 25 shows the ARDUINO
Table 32 describes the I/O configuration for the ARDUINO
UM2617 - Rev 2
®
connectors
®
Uno V3 connectors (CN11, CN12, CN18, and CN19) are available on the STM32L562E-DK
®
Uno V3 connector supports 5 V, 3.3 V and VDD for I/O compatibility. VIN, voltage range from 7 to
provides information on how to use the powering option.
®
connector pinouts.
Figure 25.
®
can fit with the STM32L562E-DK Discovery kit to offer flexibility in
®
ARDUINO connector pinouts
®
interface.
ARDUINO® connectors
®
function.
®
shield. Section
UM2617
page 38/61