Pci Card - NEC Express5800 Series User Manual

Chapter 2 Preparations
1.11

PCI Card

The server provides a riser card where you can install a PCI card on the motherboard. The riser card can have
2 low-profile PCI cards installed.
Connect PCI cards for network expansion or file device function into PCI card slots provided on the riser card.
3.5-inch Hard Disk Drive
78
Important
PCI cards and the rise card are extremely sensitive to static electricity. Be
sure to touch the metal frame of the server to discharge static electricity from
your body before handling the PCI board. Do not touch the PCI card
terminals or parts with bare hand or place the PCI card directly on the desk.
For detailed information on static electricity, refer to Chapter 2 (1.2
Anti-static Measures).
Note
• The combination of PCI cards to be installed is restricted. For details, refer to
"System Configuration Guide".
• Only Low-profile type of PCI cards can be installed in the riser card of the server.
Check the card spec before installation.
Tips
If SAS controllers, RAID Controllers, LAN cards (network boot), or Fibre Channel
controllers are used without connecting to Hard Disk Drives with OS installed, set
the Option ROM (Running BIOS Setup utility) for the card to Disabled. For the
setting, refer to Chapter 2 (1. System BIOS) in "Maintenance Guide".
PCI#2 side
Express5800/R110e-1E User's Guide
1. Installing Internal Optional Devices
Riser card
PCI#1 side