Leds For Lan Ports - NEC Express5800 Series User Manual

Chapter 1 General Description
4.7.8

LEDs for LAN ports

The three LAN ports provided at the rear of the server have two LEDs each.
•
LINK/ACT LED
This LED indicates the state of the standard LAN port. The LINK LED lights green when the server and
hub are powered and properly connected. The ACT LED flashes green when the LAN port is transmitting
or receiving data.
If the LED does not turn on in LINK state, check the cable or connection.
•
SPEED LED
This LED indicates which network interface is used.
− The two LAN ports for data transmission support 1000BASE-T, 100BASE-TX, and 10BASE-T. The
LED indicates which network interface is being used.
•
Amber:
•
Green:
•
OFF:
− Management LAN port supports 100BASE-TX and the LED flashes green during the operation.
LINK/ACT SPEED
LED LED
1
2
LAN ports
Operating with 1000BASE-T
Operating with 100BASE-TX
Operating with 10BASE-T
Express5800/R110e-1E User's Guide
4. Names and Functions of Parts
SPEED
LINK/ACT
LED
M
Management
LAN port
45