NEC Express5800 Series User Manual page 104

Chapter 2 Preparations
(1) Installation
This server can be mounted to a rack made by NEC or other companies. Mount the server to a rack in the
following procedure.
• Preparation for mounting
The left and right slide rails are fixed with tape at the front and side faces to prevent falling off during
transportation. Remove the tape before mounting it to the rack.
Removing rail assemblies
1. Remove the slide rails from left and right
sides of the server.
2. While pressing the unlock button at the
front of the server, hold the rail and
slowly slide it backward.
3. After removing the outer rail, only the
inner rail is screwed to the server.
104
Important
• The outer rail removed is used later in the subsequent procedure.
• Be careful not to get your finger caught in the rail.
Express5800/R110e-1E User's Guide
2. Installation and Connection
Press the button
to unlock
Inner rail