Chapter 2 Preparations
3.
Remove the RAID Controller and attach
the battery connector board that comes
with the extra battery to the RAID
Controller.
4.
Remove the screw securing the riser
card. Hold the both sides of the card and
lift it straight off the server.
5.
Remove the screw from the riser card
and remove the blank cover.
6.
Attach the RAID Controller to the rise
card.
7.
Insert the riser card into the slot of the
motherboard and fix the riser card with
the screw which you removed in step 4.
Position the terminal part of the riser card
in the slot of the motherboard and then
securely insert it.
PCIe#1
Low profile side
Express5800/R110e-1E User's Guide
1. Installing Internal Optional Devices
PCIe#2
Low profile side
73