NEC Express5800 Series User Manual page 96

Chapter 2 Preparations
5. Hold the tray firmly and insert it into the
bay.
6. Slowly close the handle.
The tray is locked making a clicking sound.
Turn on the server, start the SETUP utility, and then specify the boot order from the Boot menu. For
7.
details about the Boot menu, refer to Chapter 2 (1.2.5 Boot) in "Maintenance Guide".
8. Refer to Chapter 2 (1.16 Attaching the Front Bezel) to put the front bezel back.
96
Note
• Push it all the way until the handle's lock touches the frame.
• Hold the tray firmly with both hands.
Important
Do not get your finger caught between the handle and the tray.
Note
When you push the drive into the bay, confirm the handle got hooked on the frame.
Express5800/R110e-1E User's Guide
1. Installing Internal Optional Devices