Names And Functions Of Parts; Front View - NEC Express5800 Series User Manual

Chapter 1 General Description
4.

Names and Functions of Parts

This section describes the names of the server parts.
4.1

Front View

(1) Front Bezel
The cover to protect the front and top of the server. Front
Bezel can be locked with the provided BezelLlock Key.
(2) Key slot
The key slot for Bezel Lock Key that is used to lock Front
Bezel.
(3) POWER LED (green/amber)
After the power cord is connected, this LED lights amber
during initialization of system.
This LED lights green when the power is ON.
(4) Disk Access LED (green/amber)
This LED lights or flashes green when the internal hard disk
drive or optical disk drive is being accessed.
The LED lights amber if a hard disk drive error occurs.
32
(5) LINK/ACT LED (green)
This LED turns on when the server is connected to the
network.
Sequential numbers 1 and 2 indicate LAN connectors 1 and
2, respectively.
(6) Unit ID (UID) LED (blue)
This LED turns on when the UID switch is pressed.
Commands from the software also cause it to turn on or
flash.
(7) STATUS LED (green/amber)
This LED indicates the server status. It lights green when
the server is operating normally. If an abnormality is
detected, it turns on or flashes amber.
Express5800/R110e-1E User's Guide
4. Names and Functions of Parts