NEC Express5800 Series User Manual page 60

Chapter 2 Preparations
(a) When using on-board RAID Controllers (LSI Embedded MegaRAID
To use onboard RAID Controller, change setting of RAID configuration jumper on motherboard.
Jumper on motherboard (SWRAID)
Backplane for 3.5-inch Hard Disk Drive (J3)
Backplane for 2.5-inch Hard Disk Drive (J3)
After that, configure RAID System using LSI Software RAID Configuration utility.
For details, refer to Chapter 2 (4. RAID System Configuration) in "Maintenance Guide".
60
Motherboard
N8103-128/149/150/151
Tips
If you setup using the attached EXPRESS BUILDER DVD, RAID System can be
automatically created. Or, you intend to install Windows OS, OS also can be
installed automatically and seamlessly.
Express5800/R110e-1E User's Guide
1. Installing Internal Optional Devices
TM
)
3 2 1 3 2 1
Disabled
Enabled
(Default)
SWRAID 設定ジャンパ
SWRAID
Onboard SATA
N8103-128/149/150/151
controller
Onboard SATA
controller