NEC Express5800 Series User Manual page 50

Chapter 2 Preparations
6. Remove the top cover.
Refer to Chapter 2 (1.6. Removing the Top Cover).
7. Depending on the components to be installed or removed, follow the procedure in order.
Refer to Chapter 2 (1.7 Internal Flash Memory) to (1.12 Optical Disk Drive).
8. Connect cables.
Refer to Chapter 2 (1.9.1 Connecting cables).
9. Attach the top cover.
Refer to Chapter 2 (1.15 Attaching the Top Cover).
10. Mount the server onto the rack.
Refer to Chapter 2 (2.1.2 (1) Installation).
11. Install Hard Disk Drives.
Refer to Chapter 2 (1.13 3.5-inch Hard Disk Drive) or (1.14 2.5-inch Hard Disk Drive).
12. Attach the front bezel.
Refer to Chapter 2 (1.16 Attaching the Front Bezel).
This is the end of the installation or removal procedures for internal optional devices.
Continue the setup with reference to Chapter 2 (2.2 Connection).
50
Note
Chassis lock tab:
If the top cover is locked as shown in the figure below, remove the padlock.
Express5800/R110e-1E User's Guide
1. Installing Internal Optional Devices