Installing N8103-162 Extra Battery (For N8103-160) - NEC Express5800 Series User Manual

Chapter 2 Preparations
13. Attach the removed components.

1.10.4 Installing N8103-162 extra battery (for N8103-160)

This section describes the procedure of installing an extra battery for RAID Controller.
1. Refer to Chapter 2 (1.3 Overview of Installation and Removal) for preparations.
2. Refer to Chapter 2 (1.6 Removing the Top Cover) to remove the top cover.
3. Remove the RAID Controller. Connect the
battery control cable that comes with extra
battery to RAID Controller. When connecting
the cable, orient the cable so that its marking
will fit the connector.
4. Remove the screw securing the riser card.
Hold the both sides of the card and lift it
straight off the server.
5. Remove the screw from the riser card and
remove the blank cover.
Express5800/R110e-1E User's Guide
1. Installing Internal Optional Devices
Black marking
PCIe#2
Low profile side
PCIe#1
Low profile side
75