Removing The Front Bezel - NEC Express5800 Series User Manual
Hide thumbs
Also See for Express5800 Series:
- User manual (574 pages) ,
- Maintenance manual (238 pages) ,
- Installation manual (75 pages)
Table of Contents
Advertisement
Chapter 2 Preparations
1.5
Removing the Front Bezel
If the server is mounted on a rack, the front bezel needs to be removed when turning the server on or off, or
handling an optical disk drive.
1.
Insert the attached bezel lock key into the key slot and turn the key to the front bezel side while
pressing it lightly to release the lock.
2.
Hold the right end of the front bezel carefully to pull it toward you.
3.
Slide the front bezel to the left a little to release the tab from the frame and then remove the front bezel
from the server. (The example image shown is for a 2.5-inch Hard Disk Drive model.)
Bezel lock key slot
52
Express5800/R110e-1E User's Guide
1. Installing Internal Optional Devices
Advertisement
Table of Contents
