Dimm; Maximum Supported Memory Size - NEC Express5800 Series User Manual

Chapter 2 Preparations
1.8

DIMM

Install a DIMM (Dual Inline Memory Module) to a DIMM socket on the motherboard in the server. The
motherboard provides four sokets to install DIMMs.

Maximum supported memory size

1.8.1
The maximum available memory size on the server depends on the architecture (x86 architecture) and OS
specs.
A list of maximum memory sizes
OS
Windows Server 2003 R2 Standard
Windows Server 2008 Standard x86 Edition
Windows Server 2008 R2 Foundation
Windows Server 2003 R2 Standard x64 Edition
Windows Server 2008 Standard x64 Edition
Windows Server 2008 R2 Standard
Windows Server 2003 R2 Enterprise Edition
Windows Server 2008 Enterprise x86 Edition
Windows Server 2003 R2 Enterprise x64 Edition
Windows Server 2008 Enterprise x64 Edition
Windows Server 2008 R2 Enterprise
Important
• You must avoid static electricity to work with the procedure below. For
details, refer to Chapter 2 (1.2 Anti-static Measures).
• Use only the specified DIMMs. Installing a DIMM from a third party may
damage not only the DIMM but the motherboard. You will be charged to
repair failures or damages caused by the use of such products even within
the warranty period.
Tips
Up to 32 GB (8 GB × 4) of memory can be installed.
The maximum memory size
supported on each OS
4 GB
8 GB
32 GB
64 GB
1 TB
2 TB
Express5800/R110e-1E User's Guide
1. Installing Internal Optional Devices
The maximum memory size supported on
the server
4 GB (If using HW-DEP function)
* Default factory settings
About 3.3 GB (If not using HW-DEP function)
Note: When Execute Disable Bit (XD Bit) is
set to Disabled in BIOS SETUP.
8 GB
32 GB
55