Installing N8103-140 Extra Battery (For N8103-128) - NEC Express5800 Series User Manual

Chapter 2 Preparations
10. Connect a battery control cable to
battery pack, as shown in the figure to
the right. Pay attention to orientation of
connector, and insert the connector
straight and securely.
11. Attach the extra battery to the battery
bracket by using 3 screws.
The installation position of the extra
battery varies between PCI#1 and
PCI#2.
12. Attach the bracket you removed in step 8
using the screw.
13. Attach the removed components.

Installing N8103-140 extra battery (for N8103-128)

1.10.3
This section describes the procedure of installing an extra battery for RAID Controller.
1. Refer to Chapter 2 (1.3 Overview of Installation and Removal) for preparations.
2. Refer to Chapter 2 (1.6 Removing the Top Cover) to remove the top cover.
72
Attach the battery for RAID
Controller installed in PCI#2
Express5800/R110e-1E User's Guide
1. Installing Internal Optional Devices
Black marking
Attach the battery for RAID
Controller installed in PCI#1