Removal - NEC Express5800 Series User Manual

Chapter 2 Preparations
10. Using the image on the right as a reference,
connect the battery control cable to the battery
pack.
When connecting the cable, check the
orientation of the connector and connect
straight.
11. Attach the extra battery to the battery bracket
by using 3 screws.
The installation position of the extra battery
varies between PCI#1 and PCI#2.
12. Attach the bracket using the screw you
removed in step 8.
13. Attach the removed components.

Removal

1.10.5
For removing the extra battery for the RAID Controller, reverse the installation procedure.
Attach the battery for RAID
Controller installed in PCI#2
Express5800/R110e-1E User's Guide
1. Installing Internal Optional Devices
Black marking
Attach the battery for RAID
Controller installed in PCI#1
77