Chapter 2 Preparations
Installation
1.13.1
Install a Hard Disk Drive by using the following procedure. Follow the same installation procedure for other
bays.
1.
Refer to Chapter 2 (1.3 Overview of Installation and Removal) for preparations.
2.
Locate the bay where you install the Hard Disk Drive.
The server provides four bays. Install Hard Disk Drives in ascending order of bay number. For details,
refer to Chapter 2 (1.13 3.5-inch Hard Disk Drive).
3.
Remove the dummy trays.
Dummy trays are installed in all bays.
4.
Unlock the handle of the tray.
90
Important
In the RAID System, build a Disk Array using Hard Disk Drives that have the
same specifications (capacity, rotational speed, and standard).
Tips
Hard Disk Drives can be installed or removed simply by removing the front bezel.
Important
• Keep the dummy trays for future use.
• Dummy trays are intended to increase the cooling effect inside the server.
Keep the dummy trays installed in bays where Hard Disk Drives are not
installed.
Express5800/R110e-1E User's Guide
1. Installing Internal Optional Devices