NEC Express5800 Series User Manual page 81
Hide thumbs
Also See for Express5800 Series:
- User manual (574 pages) ,
- Maintenance manual (238 pages) ,
- Installation manual (75 pages)
Table of Contents
Advertisement
Chapter 2 Preparations
(1)
Standard riser cards
Model name
Product
name
SAS controller
N8103-104A
(Card performance: PCI EXPRESS (x8))
SAS controller
N8103-142
(Card performance: PCI EXPRESS 2.0 (x8))
RAID Controller (128 MB, RAID 0/1)
N8103-128
(Card performance: PCI EXPRESS 2.0 (x8))
RAID Controller (512MB,RAID 0/1)
N8103-149
(Card performance: PCI EXPRESS 2.0 (x8))
RAID Controller (512MB,RAID 0/1/5/6)
N8103-150
(Card performance: PCI EXPRESS 2.0 (x8))
RAID Controller
N8103-151
(1GB, RAID 0/1/5/6)
(Card performance: PCI EXPRESS 2.0(x8))
RAID Controller (1GB,RAID 0/1/5/6)
N8103-160
(Card performance: PCI EXPRESS 2.0 (x8))
Fibre Channel controller (8 Gbps/Optical)
N8190-153
(Card performance: PCI EXPRESS 2.0 (x8))
Fibre Channel controller (2 ch) (8 Gbps/Optical)
N8190-154
(Card performance: PCI EXPRESS 2.0 (x8))
1000BASE-T connection board (1ch)
N8104-138
(Card performance: PCI EXPRESS 2.0(x1))
1000BASE-T connection board (2ch)
N8104-132
(Card performance: PCI EXPRESS 2.0(x1))
1000BASE-T connection board (2 ch)
N8104-133
(Card performance: PCI EXPRESS(x4))
10GBASE-T connection board (SFP+/2 ch)
N8104-128
(Card performance: PCI EXPRESS 2.0 (x8))
10G Converged Network Adapter
N8104-131
(Card performance: PCI EXPRESS 2.0(x8))
N8117-01A
Additional RS-232C connector kit
*1
PCI slot performance
Transfer bandwidth (per lane)
Slot size
PCI card type
Available card size
Express5800/R110e-1E User's Guide
1. Installing Internal Optional Devices
PCIe 3.0 #1
PCIe 3.0 #2
x8lane
8 Gb/s
Low profile
x16 socket
x8 socket
Up to 200 mm
Dedicated to connecting external
devices
Dedicated to connecting external
devices
−
−
One of N8103-128/149/150/151
can be installed.
−
−
Dedicated to connecting external
HDD.
For connecting an external Fibre
Channel
For connecting an external Fibre
Channel
For additional LAN
Teaming (AFT/SFT/ALB) and
bonding with N8104-132/133/138
and on-board LAN is supported.
For additional LAN
Prepare SFP module
[N8104-129] if needed.
Teaming (AFT/SFT/ALB) and
bonding on the same board is
supported. Only 1 team per
system
For additional DCB/FcoE.
SFP+ module is factory-installed.
Teaming/bonding with LAN is not
available.
StoragePathSavior supports
redundant bus of FC.
Only one port per system is used
for LAN.
For additional serial (RS-232C)
port
Up to 1
Remarks
81
Advertisement
Table of Contents
