Names And Functions Of Parts; Front Of The Server - NEC N8100-2189F User Manual

Table of Contents

Advertisement

Chapter 1 General Description
4.

Names and Functions of Parts

The names and the functions of the server's parts are as follows.
4.1

Front of the Server

(5)
(11)
(6)
(7)
(1) POWER Switch
The switch to turn the server on and off. Press once to turn
on the server. The LED lights green when it is on. Press it
again to turn off the server. Hold down the switch for 4
seconds or more to forcibly turn off the server.
(3) POWER LED (green/amber)
After the power cord is connected, this LED lights amber
during initialization of system. This LED lights green when
the power is ON.
(3) Disk Access LED (green/amber)
This LED lights or flashes green when the internal hard disk
drive or optical disk drive is being accessed.
The LED lights amber if a hard disk drive error occurs in the
RAID system configurations except for an onboard RAID
configuration using 3.5-inch hard disk drives.
(4) STATUS LED (green/amber)
This LED indicates the server status. It lights green when
the server is operating normally.
(5) USB Connectors (front)
These connectors are used to connect devices that support
the USB interface.
Blue connector: for USB 3.0
Black connector: for USB 2.0
(12)
(10)
(4)
(3)
(8)
(2)
(5)
(1)
(9)
(7)
(6) Front Bezel
This cover protects the front part of the server.
(7) Stabilizer
To place the server vertically, install as shown in the above
figure
(8) Optical Disk Drive
Either of the following drives can be installed.
– DVD-ROM drive
– DVD SuperMULTI drive
The drive provides the following: an eject button to eject the
tray; an LED that indicates the drive access; and an eject
hole to eject the tray forcibly.
(9) HDD Bay
The bay which can accommodate HDD.
(10) 5.25-inch Expansion Bay
The bay which can accommodate backup device.
(11) Key Slot
Bezel Lock Key can be inserted into Key Slot to lock Front
Bezel.
(12) Front Door
Open this door to handle the backup drives or optical disk
drive.
Express5800/T110g-E User's Guide
4. Names and Functions of Parts
(4)
(3)
(2)
(1)
33

Advertisement

Table of Contents
loading

Table of Contents